Mold RemovalCambridge(315) 640-3590Tap to call

Arlington, MA

Arlington Storm Drying and the Two 48 Hour Rules

Call while the water is still going down, because the window for drying and the advisory against touching brook water are the same 48 hours pulling in opposite directions.

White dehumidifier with a duct hose and two black air movers in an empty room beside a stained wall

Water Damage Drying quote in Arlington

Tell us what got wet, when it got wet, and whether water is still coming in. The when matters as much as the what, because the 48 hours starts without waiting for anyone.

By submitting this form you agree to be contacted by us and by one or more independent contractors we introduce for this request. See our Privacy Policy. Your details are used only to respond to this request and arrange the service.

Would you rather talk it through? (315) 640-3590Tap to call

What Arlington owners ask the morning after a storm

Should we turn the power off down there?

If water is anywhere near outlets, the panel or heating equipment, yes, but the decision and the switching belong to a licensed electrician or the utility. Standing water and live circuits is the one part of this we will not talk anyone through over the phone.

How long before mold starts growing?

The EPA's position is that wet or damp material dried within 24 to 48 hours of a leak or spill will in most cases not grow mold. That is the whole reason the first day matters more than the choice of contractor, and it is the same number the state code uses for the owner's drying deadline.

Two 48 hour clocks pointing different ways

Two clocks start when an Arlington cellar fills after a storm, and they do not agree with each other. One says get every wet surface dry inside 48 hours or this stops being a drying job.

The other says stay out of contact with the Alewife Brook and the Upper Mystic River Basin during rain and for 48 hours after it, and avoid contact with floodwaters generally. Both are correct, which is precisely why the first hour belongs to extraction by people in the right gear rather than to a homeowner with a shop vacuum.

Belmont, Arlington, Cambridge and Somerville are all named as contributors to that brook's impairment, so this is a system problem rather than a street one.

Three things to settle before equipment lands

  1. Power to the lower level

    If water is near outlets, a panel or a furnace, that is a licensed electrician's call or the utility's. Nobody should be standing in it deciding.

  2. Photograph it where it sits

    Before anything is moved or bagged. A claim is settled on dated images and a measured area, and tidying first destroys both.

  3. Whether it was brook water

    If it came from that direction, contents handling changes completely and the advisory against contact applies for two days after the rain stops.

While you wait, weigh three things and none of them is the dehumidifier. Whether the power to that level should be off, and who is qualified to make that call, which is an electrician or the utility and not you. Whether anything still down there is better photographed where it sits than carried up wet, because photographs are what a flood claim gets settled on.

And whether the water was brook-influenced, because that answer decides whether the contents question is about drying at all. If it was clean, shallow and caught within a couple of hours, say so: sometimes the right answer is a fan, an open door and nobody sent out.

The Alewife advisory and the towns behind it

The same release states that because of increased health risks, public health officials recommend avoiding contact with the Alewife Brook and Upper Mystic River Basin during rain events and for a period of 48 hours following rainfall, and that contact with floodwaters should also be avoided. (Alewife Brook joint release)

The Alewife Brook release names Belmont, Arlington, Cambridge and Somerville as the communities whose combined sewer overflow, stormwater and other discharges contribute to water quality impairment of the Alewife Brook, and says all of them are running programs to identify and control those sources. (Alewife Brook joint release)

White trash bags, rolls of masking tape, a scrub brush and a pleated HEPA filter on plastic sheeting in a room with a cast-iron radiator
No fogging, just careful cleanup.

On the record: what the code says

105 CMR 410.500(B) states that in the event of leaks and flooding the owner shall ensure all surfaces have been dried within 48 hours from the time they are notified or the end of the event, whichever is sooner. (105 CMR 410.500(B))

The EPA puts the onset of mold growth on wet or damp material at 24 to 48 hours after a leak or spill, so material brought dry inside that window will in most cases not grow mold at all. (U.S. EPA)

Storm water still in the cellar?

Tell us the depth and the source and we will introduce the crew that handles extraction.

Tell us what the storm left behind

The drying crew we introduce says what dries and what should not be handled.

Your request is free and creates no obligation.